dtarver
November 16, 2022, 2:01pm
1
Hi
I a trying to run:
cd ~/umbrel && sudo ./scripts/update/update --repo getumbrel/umbrel#v0.5.3
but get an error
What can I do to fix it?
I see that I am able to download v0.5.3 from https://download.umbrel.com/umbrel-os.zip Do I need to change my path in the command?
Thank you,
Dora
dtarver
November 16, 2022, 7:10pm
4
@swizly12 @DarthCoin
I edited the file and opened it twice to confirm my changes were saved.
…below is what I see when I try to ping.
dtarver
November 16, 2022, 7:20pm
5
@DarthCoin @swizly12
I rebooted my node…
waited a few minutes
Then ran the following command:
cd ~/umbrel && sudo ./scripts/update/update --repo getumbrel/umbrel#v0.5.3
…but is seems to have failed… please see attached image.
Difficult to diagnose from afar. Try steps recommended here, we already tried resolv.conf but maybe your firewall settings are wrong. I assume of course your Umbrel device is connected to a network with Internet Access.
https://phoenixnap.com/kb/temporary-failure-in-name-resolution#:~:text=The%20"Temporary%20failure%20in%20name%20resolution"%20error%20occurs%20when%20the,show%20up%20on%20your%20system .
dtarver
November 17, 2022, 9:33pm
7
Yes, my node is connected directly to my iMac and I can see my node from umbrel.loca.
I will try the link now.
Thank you
dtarver
November 18, 2022, 12:10am
8
@swizly12 that article is good for a different domain.
I need the github.com nameserver to add to /etc/resolv.conf
dtarver
November 18, 2022, 12:50am
9
I think I found the solution!!
ran the following command from iMAC terminal and now I can ping GitHub.com :
echo 140.82.114.4 github.com | sudo tee -a /etc/hosts
dtarver
November 18, 2022, 12:53am
10
Now I will reboot and try the upgrade with the following commands:
rm -f ~/umbrel/statuses/update-in-progress && sudo reboot
cd ~/umbrel && sudo ./scripts/update/update --repo getumbrel/umbrel#v0.5.3
Wish me luck!
dtarver
November 18, 2022, 12:57am
11
NEW ERRORS:
Any insight on this? @swizly12 @DarthCoin
Thank you
dtarver
November 18, 2022, 2:30am
12
I have google fiber. They have no firewall and are not blocking anything.
hmmm …what can I do?
Still stuck. None of the manual instruction that I have found in this community are working. @DarthCoin @swizly12 @getumbrel_admin Any help?
hmm your setup is strange. Normally you have a router that is connected to your Internet Service Provider and all your devices are connected either via cable or WIFI to that router. You seem to have your umbrel device connected directly to your iMac and not a router. What is the iMAC conncted to ?
dtarver
November 18, 2022, 3:17pm
14
iMac is connected via wifi to Google Fiber. I have 1000 GBTS upload and download with Google and no firewall.
dtarver
November 18, 2022, 3:22pm
15
@swizly12 @getumbrel_admin @DarthCoin what is the best way to get support …I can set up a zoom meeting if that helps? @admins
dtarver
November 19, 2022, 7:32pm
16
I fixed it!
I literally plugged my Node into my Netgear Switch via Ethernet and was able to access it from SSH on a computer on my network.
I now have the current version and experience writing SSH terminal commands.
THANK YOU @swizly12 for support me, and thank you Jim i n support.
1 Like